dual-in-line sockets surface mount, gull wing open frame www.mill-max.com 516-922-6000 25 series 110...105 total number of pins a b c quantity per tube 6 0.3 0.3 0.4 67 110-xx-306-41-105000 4 0.2 0.3 0.4 102 110-xx-304-41-105000 10 0.5 0.2 0.3 40 110-xx-210-41-105000 8 0.4 0.3 0.4 50 110-xx-308-41-105000 10 0.5 0.3 0.4 40 110-xx-310-41-105000 14 0.7 0.3 0.4 28 110-xx-314-41-105000 16 0.8 0.3 0.4 25 110-xx-316-41-105000 18 0.9 0.3 0.4 22 110-xx-318-41-105000 20 1.0 0.3 0.4 20 110-xx-320-41-105000 22 1.1 0.3 0.4 18 110-xx-322-41-105000 24 1.2 0.3 0.4 16 110-xx-324-41-105000 28 1.4 0.3 0.4 14 110-xx-328-41-105000 20 1.0 0.4 0.5 20 110-xx-420-41-105000 22 1.1 0.4 0.5 18 110-xx-422-41-105000 24 1.2 0.4 0.5 16 110-xx-424-41-105000 28 1.4 0.4 0.5 14 110-xx-428-41-105000 32 1.6 0.4 0.5 12 110-xx-432-41-105000 24 1.2 0.6 0.7 32 110-xx-624-41-105000 28 1.4 0.6 0.7 28 110-xx-628-41-105000 32 1.6 0.6 0.7 24 110-xx-632-41-105000 36 1.8 0.6 0.7 22 110-xx-636-41-105000 40 2.0 0.6 0.7 20 110-xx-640-41-105000 42 2.1 0.6 0.7 18 110-xx-642-41-105000 48 2.4 0.6 0.7 16 110-xx-648-41-105000 50 2.5 0.6 0.7 16 110-xx-650-41-105000 52 2.6 0.6 0.7 14 110-xx-652-41-105000 50 2.5 0.9 1.0 16 110-xx-950-41-105000 52 2.6 0.9 1.0 14 110-xx-952-41-105000 64 3.2 0.9 1.0 12 110-xx-964-41-105000 ordering information ? for infra-red reflow and vapor phase soldering ? gull wing terminals for maximum strength and easy in-circuit test. ? hi-rel, 4-finger #30 clip rated at 3 amps. see page 208 for details. ? uses m-m #1005 pin. see page 135 for details. specify plating code xx= 13 91 93 99 41 43 44 sleeve (pin) contact (clip) 10 ?au 200 ? sn/pb 200 ? sn/pb 200 ?sn/pb 200 ?sn 200 ? sn 200 ?sn 30 ?au 10 ?au 30 ?au 200 ? sn/pb 10 ?au 30 ?au 200 ?sn 2 o ( 3 % # xx= plating code see below
|
